NoPo Nanotechnologies is India's only commercial manufacturer of Single Walled Carbon Nanotubes (SWCNTs), produced through our proprietary HiPCO (High Pressure Carbon Monoxide) process. We are a fast growing, technically driven organization working at the frontier of advanced materials manufacturing, with applications spanning energy, composites, and next generation industrial technologies.
Key Responsibilities
A. CFD Modelling and Simulation
Develop and execute CFD models for tubular reactors, multi-tubular reactors, gas flow systems, and high-temperature process equipment used in SWCNT production.
Simulate fluid flow, Reynolds number / turbulence, temperature distribution, heat transfer, pressure drop, and gas residence time under different operating conditions.
Select appropriate turbulence models, discretization schemes, boundary conditions, and numerical solution methods based on the physics of the process.
Analyse temperature uniformity, hot spots, cold zones, and thermal gradients within reactors and associated heating systems.
Evaluate heat transfer between heating elements, reactor walls, and process gases.
Investigate the impact of reactor geometry, tube arrangement, heating configuration, insulation, and operating conditions on thermal performance.
C. SWCNT Process and Reactor Optimization and troubleshooting
Model gas flow and residence time for CO-based SWCNT production processes, including HiPco or other relevant processes, as applicable to the company's technology.
Evaluate gas distribution, mixing, recirculation, flow maldistribution, and pressure drop across reactor assemblies.
Support the modelling of gas-phase reactions, species transport, and reaction kinetics where suitable kinetic data are available.
Assess the effect of operating parameters on process stability, gas utilization, thermal efficiency, and potential reactor fouling.
Collaborate with experimental teams to develop modelling approaches for complex R&D problems.
D. Validation, Troubleshooting, and Continuous Improvement
Validate CFD predictions against experimental measurements, pilot plant data, temperature profiles, pressure measurements, and flow data.
Investigate deviations between simulated and actual reactor performance and recommend corrective actions.
Conduct parametric studies, sensitivity analysis, and design-of-experiments-based simulation studies.
Provide engineering recommendations to resolve flow maldistribution, overheating, inadequate heat transfer, and pressure-drop issues.
Support root cause analysis of reactor performance and equipment-related problems.
Requirements
Bachelor's degree in Mechanical Engineering, Chemical Engineering, Aerospace Engineering, or a closely related engineering discipline.
3–5 years of hands-on experience in CFD modelling and simulation for industrial equipment, reactors, thermal systems, or chemical processes.
Proficiency in at least one major CFD platform, such as ANSYS Fluent, ANSYS CFX, or OpenFOAM.
Strong understanding of fluid mechanics, heat transfer, thermodynamics, and numerical methods.
Practical experience with turbulence modelling, mesh generation, mesh quality assessment, convergence monitoring, and mesh independence studies.
Working knowledge of energy equations, species transport, pressure-drop calculations, and residence-time analysis.
Ability to define appropriate boundary conditions and material properties and critically assess simulation assumptions.
Experience in interpreting CFD results and translating them into practical engineering recommendations.
Strong analytical, problem-solving, technical documentation, and communication skills.
Preferred Skills
Experience in CFD simulation of chemical reactors, tubular reactors, multi-tubular reactors, or high-temperature gas-phase processes.
Exposure to carbon nanotube synthesis, CVD, HiPco, gas-phase nanomaterial synthesis, or related advanced-materials processes.
Experience with conjugate heat transfer (CHT), radiation modelling, and high-temperature thermal systems.
Understanding of reacting-flow models, finite-rate chemistry, species transport, and chemical kinetics.
Exposure to particle tracking, aerosol dynamics, nucleation, deposition, or population balance modelling.
Experience in modelling electrical heating systems, heated reactor assemblies, refractory insulation, and thermal losses.
Knowledge of statistical analysis, design of experiments (DoE), and correlation of simulation results with experimental data.
Experience supporting pilot-scale equipment design, process troubleshooting, and technology scale-up.
... and run simulations, build verified reference solutions, and write Python checks for the agent's results. Requirements - A degree in Mechanical or Aerospace Engineering, or a related field such as energy or oil & gas. A PhD is preferred but not required. - Several years of hands-on industry or research CFD with OpenFOAM, ...
... and run simulations, build verified reference solutions, and write Python checks for the agent's results. Requirements - A degree in Mechanical or Aerospace Engineering, or a related field such as energy or oil & gas. A PhD is preferred but not required. - Several years of hands-on industry or research CFD with OpenFOAM, ...
... and run simulations, build verified reference solutions, and write Python checks for the agent's results. Requirements - A degree in Mechanical or Aerospace Engineering, or a related field such as energy or oil & gas. A PhD is preferred but not required. - Several years of hands-on industry or research CFD with OpenFOAM, ...
... and run simulations, build verified reference solutions, and write Python checks for the agent’s results. Requirements - A degree in Mechanical or Aerospace Engineering, or a related field such as energy or oil & gas. A PhD is preferred but not required. - Several years of hands-on industry or research CFD with OpenFOAM, ...
... and run simulations, build verified reference solutions, and write Python checks for the agent’s results. Requirements - A degree in Mechanical or Aerospace Engineering, or a related field such as energy or oil & gas. A PhD is preferred but not required. - Several years of hands-on industry or research CFD with OpenFOAM, ...
... engineering deliverables. Performs research and develops recommendations for equipment and/or materials selection. Collects, assimilates, and manages data for engineering work. Prepares increasingly complex engineering calculations following standard methods and principles. Understands and adheres to budget, schedule, and ...
This position is listed on behalf of a partner company, which manages all applications and next steps. Our partner is looking for a General Manager – (Forex/CFD) based in India. This is a senior leadership opportunity for an accomplished financial services professional to launch and scale a new Forex/CFD trading brand in ...
... leadership and stakeholders. - Mentor junior engineers on simulation methodologies and best practices. Required Qualifications - Master’s degree in mechanical engineering, Aerospace Engineering, Thermal Engineering, or related discipline. - 10+ years of experience in CFD analysis, thermal simulation, or cooling system development. ...
... entry through to long-term scale. Applicats from INDIA can be considered now In short: General Management + Market Expansion + IB & Affiliate Networks + Forex/CFD + India Interview will be direcrtly with the CEO / Owner. Day to day that means lead the creation and expansion of a new Forex & CFD brand targeting the Indian ...
... required to solve problems. May use multiple internal sources outside of own team to arrive at decisions. Ideal Candidate: Proficiency in combustion/aero-thermal CFD modelling & design processes Required Qualifications - Master's degree in Aerospace or Mechanical Engineering from an accredited university with graduate level ...