Job Summary
Troubleshoots, assembles, installs, tests and maintains mechanical systems using all necessary tools to keep equipment available and capable. Learns and understands the protocols of working safely with electricity and other energy sources with industrial equipment. May work independently and instruct or coach others.

Key Responsibilities

Health, Safety & Environmental (HSE)

Stop work and immediately report any major injury hazards.
Report any work-related injury, illness, incident or hazard.
Comply with HSE standards, policies, procedures and regulations.
Use appropriate personal protective equipment.
Promote interdependence by looking out for one another.
Correct hazards within your control and capabilities.
Recognize how your work may impact the environment and work to minimize the negative impact.
Engage in HSE Training.

Quality

Applies high standards of workmanship and craftsmanship.
Support equipment uptime and downtime failure analysis.
Performs work in accordance with diagrams, sketches, operation manuals and specifications using various tools, measuring and testing instruments.
Provide feedback into the Preventive Maintenance system.
Follows all process documentation and quality procedures.
Raises issues to minimize cost and quality exposures.
Performs quality inspections.

Delivery

Fully proficient performing troubleshooting, mechanical repairs and maintenance of equipment .
Instructs and coaches others and acts as an informal resource for team members with less experience.
Perform and documents preventive, emergency, corrective and predictive maintenance activities.
Maintains clean and orderly work area, including routine housekeeping and machine cleaning tasks.
Performs other miscellaneous duties as required to meet production goals.

Identify and reduce manufacturing constraints Schedule maintenance activities around production requirements Solve problems and improve processes Participate in continuous improvement activities Teamwork

Communicates effectively with the assigned team and with all support teams.
Completes training and personal development in line with business requirements.
Participates actively with local Total Productive Maintenance (TPM) teams in ways to improve quality, safety, process, material flow, and employee development.

Competencies:

Collaborates - Building partnerships and working collaboratively with others to meet shared objectives.

Communicates effectively - Developing and delivering multi-mode communications that convey a clear understanding of the unique needs of different audiences.

Customer focus - Building strong customer relationships and delivering customer-centric solutions.

Decision quality - Making good and timely decisions that keep the organization moving forward.

Drives results - Consistently achieving results, even under tough circumstances.

Manages complexity - Making sense of complex, high quantity, and sometimes contradictory information to effectively solve problems.

Nimble learning - Actively learning through experimentation when tackling new problems, using both successes and failures as learning fodder.

Health and Safety Fundamentals - Champions and models proactive health and safety behaviors by identifying, reporting and participating in actions to improve health and safety in order to build an interdependent culture and contribute to an injury-free workplace.

Controls Safety - Recognizes controls related hazards in a manufacturing environment (Electrical, Hydraulic, Pneumatic) to incorporate safe practices and procedures as part of the daily work plan to reduce injuries and create a safe machine environment.

Manufacturing Knowledge - Demonstrates the knowledge of manufacturing by correctly implementing changes in current processes, equipment, and applications to meet the function's needs and contribute towards continuous improvement.

Values differences - Recognizing the value that different perspectives and cultures bring to an organization.

Education, Licenses, Certifications:

High school diploma or certificate of completion of secondary education or equivalent experience to the extent such experience meets applicable regulations.

This position may require licensing for compliance with export controls or sanctions regulations.

Experience

Requires significant relevant work experience or specialized skills obtained through education, training or on-the-job experience.

Education & Experience:

Diploma in Mechanical or Mechatronics Engineering with 8 to 10 years of experience in ATPU ()

Job Description

Technical knowledge of ATPU Equipment – e.g. Nut Runners, Test Cells, Wash Booth, Paint Booth, TOD, Turn Table, PRCs.

Thorough knowledge of mechanical maintenance of all equipment in both ATPU – NK & KV.

First priority should be for “Zero Engine Loss” .

Sound technical knowledge of all Nut Runners, their mechanisms, TODs, Wash Booth, Paint Booth, etc.

Should have good technical knowledge of all Test Cells, Dyno maintenance, Butterfly Valve maintenance, etc.

Sound technical knowledge of all types of Smoke Meters, Heat Exchangers and Coolant Conditioning Units.

Should have sound technical knowledge of all types of Tuggers used for engine movement.

Should be fully conversant with CMES projects.

Sound technical knowledge of all types of Paint Pumps – pneumatic as well as electrically operated.

Should be conversant with all types of Goods Lifts used in both ATPU.

Should be fully conversant with Kardex machines, Dock Levelers and Goods Lifts.

Sound technical knowledge of Fast Acting Doors, Ovens, Dryers, etc.

Maintaining all Plant Engineering KPIs – MTTR, MTBF, PM Compliance, Craft Utilization, etc.

On-time reporting of all types of Near Hits and Spill Incidents in the ATPU Maintenance area.

Carrying out all improvement projects related to HSE, Quality, Maintenance, etc.

Good Communication and Presentation skills.

Should have good people connect – internal stakeholders as well as external suppliers/customers.

Conduct regular meetings once a month with ATPU Leader & PE Leader.

Good connect with ATPU Process Team as well as Quality Team.

Manage installation and commissioning of machines/equipment at ATPU.

Interfacing of automated material handling systems with the machines at ATPU.

Consistently maintain and improve Housekeeping standards.

Implementation of safety systems – Job Safety Analysis, Risk Assessments, Work Permits and LOTO related to maintenance activities in Machine Shop.

Maintain discipline of the workforce.

Spare parts planning and inventory management based on VED or other analysis tools.

Giving timely feedback on progress/issues to BU / Maintenance Leader.

Knowledge of Assembly Lines and Manufacturing Fundamentals.

Good Communication skills and Knowledge of Computers.

Knowledge and hands-on experience in Hydraulics and Pneumatics is a must.

Should have thorough knowledge of AVL Smoke Meter operation, maintenance, calibration and troubleshooting , including sampling systems, AUTO mode, flow, leakage, grey value and communication-related issues.

Should have good technical knowledge of Dyno F47 and F35 systems , including dyno operation, loading/unloading, speed and torque control, calibration, interlocks and troubleshooting.

Sound technical knowledge of ASU Blower systems , including blower operation, VFD control, pressure/flow monitoring, dampers, interlocks and troubleshooting.

Should have sound technical knowledge of Test Cell instrumentation and control systems , including PLC, HMI/SCADA, sensors, transducers, RTDs, thermocouples, Analog/Digital I/O and DAQ systems.

Should have good knowledge of Test Cell utilities and associated equipment , including Heat Exchangers, Coolant Conditioning Units, pumps, valves, Butterfly Valves and associated control systems.

Ability to troubleshoot Test Cell interlocks, engine safety systems, emergency shutdown systems and equipment permissive to minimize engine downtime.

Should be capable of analyzing and troubleshooting Test Cell load variation, pressure/flow fluctuations, temperature variation, instrumentation and communication-related issues .

Ensure maximum Test Cell availability and minimum Engine Loss through effective PM, breakdown response, RCA and reliability improvement activities.

Should coordinate effectively with Test Cell Process, Quality, Engineering, PE teams and external OEMs/Suppliers for troubleshooting, calibration, maintenance and improvement activities.

Job Manufacturing

Organization Cummins Inc.

Role Category On-site with Flexibility

Job Type Shop

ReqID 2436180

Relocation Package Yes

100% On-Site No

Mechanical Maintenance - Level III

Start with your email