Vacancy description
Field Service Engineer - Genset Support in Pune, भारत
Rolls-Royce
Pune, भारत
Job Description Job Title: Field Service Engineer - Genset Support Years of Experience: 3 to 10 years Education: ITI / Diploma in electrical / electronics Location: Pune Why Rolls-Royce?At Rolls-Royce we are proud to be a business that has truly helped to shape the modern world and are committed to always being a force for progress; powering, protecting and connecting people everywhere. By joining Rolls-Royce, you'll have the opportunity to work on world-class solutions, supported by a culture that believes individuality is our greatest strength, and all perspectives, experiences and backgrounds help us innovate and enable our high-performance culture. Summary The Genset Support Engineer is responsible for providing comprehensive electrical and mechanical troubleshooting, preventive-maintenance, breakdown-maintenance, and technical support for commissioned diesel generator sets (DG/Gensets) installed at customer sites, including Balance of Plant (BoP).The primary responsibility of this position is to ensure that commissioned gensets remain safe, reliable, efficient, and operational, while minimizing equipment downtime and ensuring timely resolution of electrical and mechanical https://jobeax.com/link/Cq4qnkPlwMaS831P engineer will act as the key technical interface between the company, customers, service teams, vendors, and other stakeholders for all post-commissioning genset-related requirements. Key Responsibilities
- Genset Electrical Support
- Troubleshoot electrical faults in DG sets, control panels synchronization panels, and associated systems.
- Diagnose problems related to:
- Generator alternators
- AVR systems
- Excitation systems
- Generator protection systems
- Battery charging systems
- Starting circuits
- DC control circuits
- AC output circuits
- Control modules and controllers
- Sensors and transmitters
- CTs/PTs
- Relays and contactors
- Circuit breakers
- Emergency stop circuits
- MCCBs/ACBs
- Wiring and termination
- Troubleshoot starting failures, failure-to-start conditions, nuisance trips, shutdown alarms, and abnormal electrical readings.
- Check and rectify issues related to low/high voltage, low/high frequency, phase imbalance, voltage fluctuations, reverse power, overload, earth fault, overcurrent, and other protection trips.
- Carry out testing of alternator insulation resistance, winding resistance, continuity, and related electrical parameters.
- Verify proper operation of generator protection and monitoring systems.
- Troubleshoot battery, charger, starter motor, and associated DC electrical systems.
- Inspect electrical connections, cable terminations, busbars, glands, earthing, and control wiring.
- Identify loose connections, overheating points, insulation deterioration, cable damage, and other electrical defects.
- Support testing and troubleshooting of generator synchronization and load-sharing systems.
- Support troubleshooting of multiple-genset parallel operation.
- Verify phase sequence, voltage, frequency, and synchronization parameters.
- Interface with OEMs and specialist vendors for controller, alternator, AVR, and electrical protection-related issues.
- Diagnose engine-related faults and performance issues.
- Troubleshoot problems associated with:
- Engine starting
- Excessive vibration
- Abnormal noise
- High coolant temperature
- Low/high oil pressure
- Excessive smoke
- Poor engine performance
- Excessive fuel consumption
- Low engine RPM
- Overspeed
- Engine hunting
- Coolant leakage
- Oil leakage
- Fuel leakage
- Exhaust leakage
- Inspect and troubleshoot cooling systems, including radiators, cooling fans, thermostats, coolant pumps, hoses, and expansion tanks.
- Inspect lubrication systems, including engine oil, oil filters, oil pumps, and related components.
- Inspect and troubleshoot fuel systems, including fuel pumps, injectors, filters, fuel lines, and fuel tanks.
- Inspect exhaust systems for blockages, leakage, excessive back pressure, and abnormal conditions.
- Check engine belts, pulleys, couplings, mounts, hoses, and mechanical fasteners.
- Identify and rectify abnormal vibration and alignment-related issues.
- Check engine-generator coupling and mounting conditions.
- Support major and minor engine maintenance activities as required.
- Carry out replacement of defective mechanical components within the engineer's technical competency.
- Coordinate with OEM/service specialists for major engine overhauls and specialized repairs.
- Follow manufacturer-recommended preventive-maintenance schedules.
- Conduct periodic inspection of gensets and associated systems.
- Check engine oil level and condition.
- Inspect and replace oil, fuel, and air filters as required.
- Check coolant level and condition.
- Inspect radiator and cooling system.
- Check battery condition, electrolyte where applicable, terminal connections, and charging voltage.
- Inspect belts, hoses, clamps, and mechanical connections.
- Check fuel system for leakage and contamination.
- Inspect exhaust system.
- Check generator output voltage, current, frequency, and load.
- Check control-panel alarms and indications.
- Inspect electrical connections and cable terminations.
- Check earthing and bonding.
- Check emergency-stop functionality.
- Verify operation of safety and protection systems.
- Conduct no-load and load testing as required.
- Record all preventive-maintenance observations and corrective actions.
- Attend customer breakdown calls within the defined service response time.
- Quickly assess the equipment condition and identify the root cause of failure.
- Carry out systematic electrical and mechanical troubleshooting.
- Restore the genset to operational condition at the earliest possible time.
- Prioritize safety-critical and business-critical breakdowns.
- Coordinate with service technicians, spare-parts teams, vendors, and OEM specialists.
- Identify parts required for repair and communicate requirements to the concerned teams.
- Provide temporary/alternative solutions where appropriate to minimize customer downtime.
- Escalate major or recurring failures to the Service Manager/Technical Team.
- Maintain complete records of breakdowns, corrective actions, and pending issues.
- Analyze fault codes, alarms, operating parameters, and historical data.
- Review previous service records to identify recurring problems.
- Perform systematic electrical and mechanical diagnosis.
- Conduct root-cause analysis (RCA) for major or repeated failures.
- Recommend permanent corrective actions.
- Identify operational, installation, maintenance, or component-related causes.
- Prepare technical failure reports where required.
- Recommend design or installation improvements to prevent recurrence.
- No-load testing.
- Partial-load testing.
- Full-load testing.
- Load-bank testing where required.
- Monitoring voltage, current, frequency, power factor, kW and kVA.
- Monitoring engine parameters such as coolant temperature, oil pressure, RPM, and fuel consumption.
- Monitoring exhaust and operating conditions.
- Checking load balance across phases.
- Verifying genset performance against specified ratings.
- Identifying abnormal performance trends.
- Preparing load-test and performance reports.
- AMF panel troubleshooting.
- Automatic start/stop functionality.
- Mains failure and mains restoration logic.
- Auto/manual mode troubleshooting.
- ATS operation and interlocking.
- Generator breaker operation.
- Mains breaker operation.
- Generator-to-generator synchronization.
- Generator-to-mains synchronization.
- Load sharing.
- kW/kVAR sharing.
- Synchronizing relay/controller configuration.
- Troubleshooting communication between gensets and controllers.
- Testing emergency and safety interlocks.
- Reading and interpreting controller alarms and fault codes.
- Checking engine and generator parameters through the controller.
- Diagnosing sensor-related faults.
- Checking communication between controller and engine ECU.
- Supporting controller configuration and parameter verification.
- Uploading/downloading controller configuration where authorized.
- Maintaining backup copies of configuration files where applicable.
- Supporting firmware/software updates through authorized procedures.
- Coordinating with OEM technical support for controller-related problems.
- Maintaining records of controller settings and modifications.
- Understand customer complaints and operational requirements.
- Attend customer sites and diagnose problems.
- Explain technical issues and corrective actions clearly to customers.
- Provide operating and maintenance guidance.
- Advise customers regarding recommended preventive maintenance.
- Educate customer operators on correct genset operation.
- Advise customers on loading, operating parameters, and safe operating practices.
- Handle customer technical queries professionally.
- Ensure customer satisfaction through timely and effective technical resolution.
- Identify opportunities for additional service, maintenance, refurbishment, or replacement requirements and communicate them to the relevant commercial team.
- Engine condition.
- Alternator condition.
- Control panel.
- AMF/ATS system.
- Synchronization system.
- Fuel system.
- Exhaust system.
- Cooling system.
- Battery and charger.
- Earthing system.
- Cabling and terminations.
- Room ventilation.
- Air intake and exhaust arrangements.
- Foundation and anti-vibration arrangements.
- Load profile.
- Operating environment.
- Safety systems.
- General housekeeping.
- Customer/site details.
- Genset model and rating.
- Engine and alternator details.
- Running hours.
- Complaint description.
- Fault/alarm information.
- Diagnostic findings.
- Electrical measurements.
- Mechanical measurements.
- Root cause.
- Corrective action.
- Parts replaced.
- Parts required.
- Recommendations.
- Pending actions.
- Customer remarks/acceptance.
- Service reports.
- Breakdown reports.
- Preventive-maintenance reports.
- Inspection reports.
- Load-test reports.
- Root-cause-analysis reports.
- Warranty reports.
- Technical recommendations.
- Service completion reports.
- Identify defective components.
- Determine correct replacement parts.
- Prepare spare-parts requirements.
- Verify part numbers and specifications.
- Recommend critical spare parts for customers.
- Maintain awareness of commonly failing components.
- Coordinate with stores/procurement for urgent spare requirements.
- Verify received parts before installation.
- Report incorrect or defective supplied parts.
- Identifying whether a failure is potentially warranty-related.
- Collecting required technical evidence.
- Recording operating conditions and failure symptoms.
- Taking photographs and measurements where required.
- Preparing warranty failure reports.
- Coordinating with OEMs and suppliers.
- Supporting inspection of failed components.
- Ensuring warranty claims are supported by appropriate documentation.
- Tracking warranty corrective actions until closure.
- Follow Lockout/Tagout (LOTO) procedures.
- Ensure equipment is isolated before maintenance.
- Use appropriate PPE.
- Follow electrical safety procedures.
- Follow safe fuel-handling practices.
- Follow safe battery-handling procedures.
- Ensure proper earthing before testing.
- Avoid unsafe operation of rotating machinery.
- Ensure guards and protective covers are properly installed.
- Report unsafe site conditions.
- Stop work when an unsafe condition presents an unacceptable risk.
- Follow customer and company HSE procedures.
- Service technicians.
- Service managers.
- Project/commissioning teams.
- Electrical engineers.
- Mechanical engineers.
- Design engineering teams.
- Spare-parts teams.
- Procurement.
- OEM representatives.
- Panel manufacturers.
- Alternator manufacturers.
- Customers and facility-management teams.
Type of Contract
Permanent