In This Role, Your Responsibilities Will Be:

You will lead the engineering, development, integration, testing, and commissioning of advanced Data Center PMS/ECMS solutions for AI-ready, mission-critical facilities with onsite generation and complex electrical distribution systems.

Review customer specifications, SLDs, protection schemes, AI workload profiles, generator operating philosophy, and power management requirements.
Design PMS/ECMS architectures, DCS control strategies, network topologies, and system integration approaches for high-density data center electrical infrastructure.
Develop, configure, and tune Ovation DCS databases, control logic, graphics, alarms, trends, displays, and operator interfaces for PMS applications.
Engineer advanced load management functions including AI peak demand control, priority-based load shedding, load restoration, load sharing, islanding, black start, bus transfer, and demand management.
Develop complex load bus management schemes for multiple electrical buses, generators, transformers, switchgear lineups, UPS/BESS interfaces, and critical/non-critical load groups.
Engineer and validate multi-generator synchronization, load sharing, generator sequencing, spinning reserve logic, and transitions between grid-connected, islanded, and backup operating modes.
Integrate generators, switchgear, substations, transformers, protective relays, RTACs, meters, UPS, BESS, renewable energy systems, and utility/grid interfaces.
Configure and troubleshoot IEC 61850, Modbus, OPC UA, DNP3, and related communication protocols used for power system automation and electrical asset integration.
Prepare engineering deliverables including PMS philosophy, FDS, logic narratives, cause-and-effect matrices, I/O lists, communication documents, simulation plans, and test procedures.
Execute simulation, FAT, SAT, system integration, commissioning, startup, performance tuning, and customer acceptance testing for PMS/ECMS systems.
Lead system power-up, redundancy testing, communication verification, functional testing, failure-mode testing, and validation of electrical operating scenarios.
Coordinate with customers, consultants, vendors, project teams, and subcontractors while ensuring compliance with project requirements, quality standards, industry codes, and mission-critical uptime expectations.

Who You Are:

You should be able to assume responsibility for the outcomes of others . Promotes a sense of urgency and establishes and enforces individual accountability in the team. You should be able to deliver messages in a clear, compelling, and concise manner. Actively listens and checks for understanding. Sets aggressive goals and has high standards. You should be consistently one of the top performers. Pursues everything with energy, drive, and the need to finish as per business needs.

For This Role, You Will Need:

Bachelor's or Master's degree in Electrical Engineering, Power Systems, Instrumentation & Control, or a related engineering discipline.
Five (5) to Twelve (12) years of experience in PMS, ECMS, EMS, DCS, SCADA, microgrid, or power system automation projects.
Strong understanding of data center electrical infrastructure, AI/high-density load behavior, onsite power generation, UPS/BESS systems, and grid-connected or islanded operating modes.
Hands-on experience developing, configuring, testing, and tuning DCS-based PMS or load management applications.
Knowledge of demand control, priority-based load shedding, load restoration, load sharing, bus load management, generator sequencing, and spinning reserve logic.
Experience with synchronization of multiple generators and operation of electrical systems across grid-connected, islanded, standby, and black-start scenarios.
Strong knowledge of electrical power generation, distribution, protection, metering, switchgear, transformers, substations, and control systems.
Ability to interpret SLDs, protection drawings, control schematics, communication architectures, I/O lists, and cause-and-effect requirements.
Working knowledge of industrial communication protocols such as IEC 61850, Modbus, OPC UA, DNP3, and related automation networks.
Hands-on experience in simulation, FAT, SAT, commissioning, startup, troubleshooting, and performance tuning for mission-critical power control systems.
Strong analytical, troubleshooting, communication, and customer-facing skills with the ability to lead technical discussions and resolve complex site issues.
Willingness to travel for project execution, commissioning, customer acceptance testing, and site support.

Preferred Qualifications that Set You Apart:

Deep experience with Data Center PMS/ECMS, microgrid, hybrid EMS, and DCS/SCADA solutions for mission-critical or high-availability facilities.
Practical understanding of AI data center power behavior, including fast load ramps, high-density compute loads, power quality impacts, and coordination between utility supply, onsite generation, UPS, BESS, and critical load blocks.
Proven expertise in developing and tuning advanced load management applications, including AI peak demand control, priority-based load shedding, load restoration, bus load management, power sharing, and islanding logic.
Hands-on experience with multi-generator synchronization, generator sequencing, spinning reserve, black start, load sharing, and transitions between grid-connected, islanded, and backup power modes.
Experience with Emerson Ovation™, SEL RTAC, protective relay integration, IEC 61850 engineering, and equivalent IED/substation automation architectures.
Strong knowledge of AIS/GIS substations, switchyards, medium-voltage and low-voltage switchgear, generator controls, AVRs, synchronization systems, and utility/grid interconnection requirements.
Experience integrating UPS, BESS, renewable sources, backup generation, fuel systems, meters, protection relays, and electrical monitoring devices into centralized PMS/ECMS platforms.
Working knowledge of IEEE, IEC, NEC, NFPA, data center reliability practices, utility grid codes, and mission-critical electrical safety requirements.
Knowledge of industrial cybersecurity principles for DCS, SCADA, substation automation, and mission-critical power control systems.
Experience leading simulation, digital testing, integrated FAT, SAT, commissioning, performance tuning, and customer acceptance testing for complex PMS/ECMS projects.
Ability to develop software design documentation, control narratives, test scripts, failure-mode scenarios, and validation plans for load management and generator control functions.
Familiarity with programming or scripting languages such as C, C++, Python, or structured control logic used in automation and power management applications.

Our Culture & Commitment to You:

At Emerson, we prioritize a workplace where every employee is valued, respected, and empowered to grow. We foster an environment that encourages innovation, collaboration, and diverse perspectives - because we know that great ideas come from great teams. Our commitment to ongoing career development and growing an inclusive culture ensures you have the support to thrive. Whether through mentorship, training, or leadership opportunities, we invest in your success so you can make a lasting impact. We believe diverse teams working together are key to driving growth and delivering business results.

We recognize the importance of employee wellbeing. We prioritize providing competitive benefits plans, a variety of medical insurance plans, Employee Assistance Program, employee resource groups, recognition, and much more. Our culture offers flexible time off plans, including paid parental leave (maternal and paternal), vacation and holiday leave.

ABOUT US

WHY EMERSON

Our Commitment to Our People

At Emerson, we are motivated by a spirit of collaboration that helps our diverse, multicultural teams across the world drive innovation that makes the world healthier, safer, smarter, and more sustainable. And we want you to join us in our bold aspiration.

We have built an engaged community of inquisitive, dedicated people who thrive knowing they are welcomed, trusted, celebrated, and empowered to solve the world's most complex problems - for our customers, our communities, and the planet. You'll contribute to this vital work while further developing your skills through our award-winning employee development programs. We are a proud corporate citizen in every city where we operate and are committed to our people, our communities, and the world at large. We take this responsibility seriously and strive to make a positive impact through every endeavor.

At Emerson, you'll see firsthand that our people are at the center of everything we do. So, let's go. Let's think differently. Learn, collaborate, and grow. Seek opportunity. Push boundaries. Be empowered to make things better. Speed up to break through. Let's go, together.

Accessibility Assistance or Accommodation

If you have a disability and are having difficulty accessing or using this website to apply for a position, please contact: idisability.administrator@emerson.com .

ABOUT EMERSON

Emerson is a global leader in automation technology and software. Through our deep domain expertise and legacy of flawless execution, Emerson helps customers in critical industries like life sciences, energy, power and renewables, chemical and advanced factory automation operate more sustainably while improving productivity, energy security and reliability.

With global operations and a comprehensive portfolio of software and technology, we are helping companies implement digital transformation to measurably improve their operations, conserve valuable resources and enhance their safety.

We offer equitable opportunities, celebrate diversity, and embrace challenges with confidence that, together, we can make an impact across a broad spectrum of countries and industries. Whether you're an established professional looking for a career change, an undergraduate student exploring possibilities, or a recent graduate with an advanced degree, you'll find your chance to make a difference with Emerson. Join our team - let's go!

No calls or agencies please.

Data Center PMS - Project Technical Lead

Start with your email